You are viewing the site in preview mode

Skip to main content

Advertisement

Table 3 Deviation analysis - film stack

From: Scanned carbon beam irradiation of moving films: comparison of measured and calculated response

ROIirradiated
  Film all films without film 5
experiment #1 #2 #3 #4 #5 mean SD min max mean SD min max
stationary -4.5 -- -4.8 1.1 -44.3 -13.1 20.9 -44.3 1.1 -2.7 3.3 -4.8 1.1
no2 -4.2 -2.8 -3.2 -7.1 -11.2 -5.7 3.5 -11.2 -2.8 -4.3 1.9 -7.1 -2.8
no3 -10.3 -5.5 -10.6 -2.5 -43.1 -14.4 16.4 -43.1 -2.5 -7.2 3.9 -10.6 -2.5
no4 -3.6 -2.9 -6.2 -2.8 -36.8 -10.5 14.8 -36.8 -2.8 -3.9 1.6 -6.2 -2.8
no5 -6.9 -7.3 -12.7 -8.0 -35.0 -14.0 12.0 -35.0 -6.9 -8.7 2.7 -12.7 -6.9
mean -6.2 -4.6 -8.2 -5.1 -31.5 -11.1 11.7 -31.5 -3.7 -6.0 2.5 -9.2 -3.7
SD 3.0 2.2 4.3 2.8 14.0         
min -10.3 -7.3 -12.7 -8.0 -43.1         
max -3.6 -2.8 -3.2 -2.5 -11.2         
ROItarget
  Film all films without film 5
experiment #1 #2 #3 #4 #5 mean SD min max mean SD min max
stationary -1.3 - -6.3 -3.3 -43.2 -13.5 19.9 -43.2 -1.3 -3.6 2.5 -6.3 -1.3
no2 -4.7 -3.3 -5.2 -7.5 -14.0 -6.9 4.2 -14.0 -3.3 -5.2 1.8 -7.5 -3.3
no3 -6.4 -3.5 -8.9 -4.2 -33.5 -11.3 12.6 -33.5 -3.5 -5.7 2.4 -8.9 -3.5
no4 -0.6 -3.2 -9.6 -3.3 -21.5 -7.7 8.4 -21.5 -0.6 -4.2 3.8 -9.6 -0.6
no5 -8.3 -9.0 -13.8 -11.5 -33.9 -15.3 10.6 -33.9 -8.3 -10.7 2.5 -13.8 -8.3
mean -5.0 -4.8 -9.4 -6.6 -25.7 -10.3 9.0 -25.7 -3.9 -6.4 2.6 -10.0 -3.9
SD 3.3 2.9 3.5 3.7 9.7         
min -8.3 -9.0 -13.8 -11.5 -33.9         
max -0.6 -3.2 -5.2 -3.3 -14.0         
  1. Mean deviation (in %) between calculated and measured film response S/S0 determined in the two ROIs for the experimental setup with combined lateral and longitudinal motion. "all films" and "without film 5" show the data for a certain experiment. The data underneath the outcome for the individual films reflect the outcome per films in the 4 experiments with target motion. Film #2 (stationary) was damaged in the development process.